Overhead Floor Panels
Overhead floor panels adopts national standard cold-rolled steel plate, hard cold-rolled steel plate on the surface, cold-rolled deep-drawn steel plate on the bottom plate, formed by stamping, stretching and spot welding, the inner cavity is filled with 42.5 cement, the surface is electrostatically sprayed after phosphating and pickling, and the surface plastic powder thickness is greater than 70um.
Send Inquiry
Product Description
System Assembly
The OA overhead floor panels system consists of floor, support, shockproof pads, and screws. The support is a galvanized and cast aluminum alloy structure. The floor is placed on the support with shockproof pads. The screws pass through the corner lock holes around the floor and are directly connected to the support, which is more stable and not easy to loosen.
Technical parameters
| Model | Specifications (mm) | Single board concentrated load | Impact load | Ultimate load | Uniform load | Fire performance | |
| N | KG | LB/KG | N | (N/m2) | |||
| FS660 | 600×600×33 | ≥2940 | ≥300 | 100/45 | ≥8850 | ≥14710 |
ASTM E84-01:Flame spread:0 Smoke Density:0 |
| FS800 | 600×600×33 | ≥3560 | ≥363 | 100/45 | ≥11250 | ≥17780 | |
| FS1000 | 600×600×33 | ≥4450 | ≥454 | 150/68 | ≥14500 | ≥22220 | |
| FS1250 | 600×600×33 | ≥5560 | ≥567 | 150/68 | ≥18360 | ≥27780 | |
| Model | Specifications (mm) | Single-board concentrated load | Impact load | Ultimate load | Uniform load | Fire performance | |
| N | KG | LB/KG | N | (N/m2) | |||
| FS442 | 500×500×28 | ≥1960 | ≥201 | 75/34 | ≥6890 | ≥10000 | |
| FS660 | 500×500×28 | ≥2940 | ≥300 | 100/45 | ≥8850 | ≥14710 |
ASTM E84-01:Flame spread:0 Smoke Density:0 |
| FS800 | 500×500×28 | ≥3560 | ≥363 | 100/45 | ≥11250 | ≥17780 | |
| FS1000 | 500×500×28 | ≥4450 | ≥454 | 150/68 | ≥14500 | ≥22220 | |
| FS1250 | 500×500×28 | ≥5560 | ≥567 | 150/68 | ≥18360 | ≥27780 | |
Application Scope
Mainly used in high-end (intelligent) office buildings, as well as offices in banks, taxation, industry and commerce, customs, insurance, and government buildings;
Product Features
1. All-steel structure, small product weight, strong bearing capacity and impact resistance;
2. Surface electrostatic spraying, soft light, wear resistance, waterproof, fireproof, dustproof, anti-corrosion, long service life;
3. High dimensional accuracy, good interchangeability, flexible assembly, convenient maintenance, high reuse rate;
4. The outlet mold is formed, wiring is easy, and the ground socket is more convenient to install;
Hot Tags: Overhead Floor Panels, China, Manufacturer, Supplier, Factory
Related Category
Send Inquiry
Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.
Related Products
